Ubiquiti
Предпазител от пренапрежение Ubiquiti ETH-SP-G2
Артикул №: 1000108374
Категория:
Мрежови адаптери
14,99 €
✓ Налично във външен склад
Ubiquiti Networks. The ETH-SP-G2 is a
electrostatic discharge and surges. Since
1 Gbps. Two passive, surge-protected
with ESD protection. However, to protect
the building. Damaging ESD attacks
Характеристики
| ESD Protection for Outdoor | |
| High-Speed Networks | |
| Introducing the next generation Ethernet | |
| Surge Protector, model ETH-SP-G2, from | |
| cost-effective solution for protecting | |
| outdoor Ethernet devices from damaging | |
| all Ubiquiti® airMAX® devices already | |
| have robust ESD protection built in | |
| adding the ETH-SP-G2 to the installation | |
| provides an additional layer of protection | |
| to the network. | |
| The ETH-SP-G2 is engineered to protect | |
| Power-over-Ethernet (PoE) or non-PoE | |
| devices with connection speeds of up to | |
| RJ45 connections provide maximum | |
| equipment compatibility. | |
| Ideal for WISP Networks | |
| All Ubiquiti airMAX devices are equipped | |
| outdoor devices, and to meet certain | |
| local code requirements, installing the | |
| ETH-SP-G2 is essential. | |
| For example, to guard against costly | |
| service calls, and to help your subscriber | |
| installations meet code requirements | |
| install two ETH-SP-G2 devices: one near | |
| the CPE, and the other at the entry point to | |
| and surges will be absorbed by the | |
| ETH-SP-G2 devices and safely discharged | |
| into the ground. | |
| Dimensions 91 x 61 x 32.5 mm | |
| (3.58 x 2.4 x 1.28") | |
| Weight 80 g | |
| (2.82 oz) | |
| Interface Connections (2) RJ45 Female Connectors | |
| ESD/EMP Protection Absorbing Transient Current with Response to | |
| Surge Voltage from 100V/s to 1kV/µs | |
| DC Spark-Over Voltage 90V @ 100V/s | |
| Maximum Impulse Spark-Over Voltage 700V @ 1kV/µs | |
| Discharge Current 10kA+ | |
| Maximum Insulation Resistance 1G ohm @ 50V | |
| Maximum Capacitance 1.0 pF @ 1 MHz | |
| Data Line Protection RJ45 10/100/1000 Ethernet | |
| IEEE 802.3af PoE Support Yes | |
| Shock and Vibration Certification ETSI300-019-1.4 Standard | |
| Operating Temperature -30 to 65° C | |
| (-22 to 149° F) | |
| Operating Humidity 10 to 90% Noncondensing |