Докинг станция DeLock 64138
This docking station by Delock enables the installation of an M.2 NVMe and an M.2 SATA SSD as well as an SD Express memory card and it can be connected via USB to the PC, laptop, tablet or smart phone.
SD Express slot
The SD Express slot allows to read and write SD Express memory cards. SD, SDHC and SDXC memory cards with UHS-I and UHS-II can also be used.
Simultaneous using of all ports
All three memories can be used simultaneously.
Clone Function without PC
The built-in clone function allows to clone memory without using a PC. It is possible to clone from NVMe to SATA, SD to NVMe, SD to SATA and SATA to NVMe.
Ideal test equipment
The memory is simply plugged into the robust housing and can be used immediately. No screws, tools or accessories are required, which means that the SSD can be changed quickly.
Power supply included
The power supply, which is included, will be connected to the USB-C power connector and thus supplies the docking station and all connected memories with power.
Характеристики
| Конектори | 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C female 2 x 67 pin M.2 key M slot 1 x SD Express slot 1 x USB Type-C female (power supply) |
| Чипсет | JMicron JMS581 |
| Supports M.2 modules with key B+M based on SATA | Да |
| Supports NVM Express (NVMe) | Да |
| Supports S.M.A.R.T | Да |
| Supports TRIM | Да |
| Supports DevSleep | Да |
| Supports Native Command Queuing (NCQ) | Да |
| Data transfer rate up to | 10 Gbps |
| Supports UASP | Да |
| LED indicator for power, access and copy status | Да |
| Bootable | Да |
| Function key | 1 x Clone button 1 x On / Off switch 1 x DIP switch for clone mode |
| Dimensions (LxWxH) | ca. 76 x 79 x 18 mm |
| Hot Plug, Plug & Play | Да |
| Power supply specification | Да |
| Wall power supply | Да |
| Input | AC 100 ~ 240 V / 50 ~ 60 Hz / 0.6 A |
| Output | 5.0 V / 3.0 A |
| System requirements | Да |
| Android | 10.0 or above |
| Chrome OS | 90.0 or above |
| iPad Air (4th Generation) or above | Да |
| Linux Kernel | 5.8 or above |
| Mac OS | 11.2.3 or above |
| Surface Pro | 7 |
| Windows | 8.1/8.1-64/10/10-64 |
| PC or laptop with a free USB Type-A port or | Да |
| Tech specs | General Function • bootable • Clone Function Supported operating system • Linux Kernel 5.8.0 or above • Surface Pro 7 • Windows 10 32-Bit • Windows 10 64-Bit • Windows 8.1 32-Bit • Windows 8.1 64-Bit • Android 10.0 or above • iPad Air (4th Generation) or above • Mac OS 11.2.3 or above • Chrome OS 90.0 or above LED indicator • power, access and copy status Slot • PCIe • SATA Maximum height of the components on the module • 1.5 mm application of double-sided assembled modules supported Interface Connector 1 • 1 x USB 10 Gbps USB Type-C female Connector 2 • 2 x 67 pin M.2 key M slot connector 3 • 1 x USB Type-C female (power supply) connector 4 • 1 x SD Express slot Technical characteristics Data transfer rate • 10 Gbps |